XILINX JTAG USB DRIVER

It should certainly be valid for any Debian based system, and probably any system where it is possible to do what I have suggested. This step is once simple command, but the most important. This approach does not use the official Xilinx libraries but a replica of them. Then you need to issue the make command. If you jumped straight here to this section the next section on installing Cable Drivers should standalone. Search the Site Search for: Then you will be required to use git to download the source.

Uploader: Samugal
Date Added: 22 December 2014
File Size: 56.27 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 5381
Price: Free* [*Free Regsitration Required]

First of all, this guide assumes you have installed Xilinx ISE version It compiles the cable driver required. Then you will be required to use git to download the source. Xilinx jtag usb the welcome screen.

Here are my suggested responses: When installing Xilinx ISE, make sure that the installer is located on the hard drive. If you have trouble, try sudo make xilinx jtag usb to build the bit driver.

Platform Cable USB II

You xilinx jtag usb firstly change to the installation directory. Once you have done so, close the License Config Manager. You next have to select the last few installation options: This page was last modified on 25 Juneat To xilinx jtag usb the installer, enter the following command:.

Then you need to issue the make command. This is updated for Ubuntu If you have problems, jtg check that you have similar options set in your ISE install to those I outline in the previous section. Finally, I am no expert in any of this: Since the drivers now support bit too, you don’t need to build the bit version.

When asked, uncheck all xilunx for the installation and start it. System Edition and install it. To do this some software must be installed and compiled Burning the files to DVD has been reported to create problems. Firstly change into the source xilinx jtag usb created in the previous step.

Accept the License Agreement part 1. Then you will be required to use git to download the source.

Xilinx USB Platform Cable

Burning the files to DVD has been reported xiliinx create problems. If you xilinx jtag usb have problems, there is much more depth to the old tutorialwhich you can view here.

I suggest you do this as root. I just applied what knowledge I did have, and made xilinx jtag usb work. This step is once simple command, but the most important. The installer needs to have write permissions to the setup files.

Xilinx JTAG Linux – George Smart – M1GEO

To start the installer, enter the following command: The installer needs to have write permissions to the setup files. If everything went ok a new rule file “xusbdfwu. Some people reported that xilix bit version didn’t work correctly on bit host. You will also need libusb-dev which is required in the xiilinx of the drivers. Next, you will need to have GIT installed to get the required libraries. If you found this information helpful, you can Donate a small sum of money xilinx jtag usb your choosing to help me get through xilinx jtag usb degree and for the upkeep of this server.